The page uses Browser Access Keys to help with keyboard navigation. Click to learn moreSkip to Navigation

Different browsers use different keystrokes to activate accesskey shortcuts. Please reference the following list to use access keys on your system.

Alt and the accesskey, for Internet Explorer on Windows
Shift and Alt and the accesskey, for Firefox on Windows
Shift and Esc and the accesskey, for Windows or Mac
Ctrl and the accesskey, for the following browsers on a Mac: Internet Explorer 5.2, Safari 1.2, Firefox, Mozilla, Netscape 6+.

We use the following access keys on our gateway

n Skip to Navigation
k Accesskeys description
h Help
    Oregon Institute of Technology
   
 
  Oct 22, 2017
 
2017-18 University Catalog 
  
2017-18 University Catalog

Course Descriptions


Course descriptions in this section are reasonable summaries only and are neither completely inclusive nor completely exclusive of total course content for any given course.

Courses listed herein may or may not be offered each term.

Courses are listed alphabetically according to prefix.

Numbering Code

Courses are grouped into a three-digit number series which indicates the normal teaching levels. Some variations may occur.

1-99 Preparatory and Developmental Courses. Courses numbered below 100 are not applicable toward a degree even though units are assigned, grades are awarded and tuition is assessed.

Lower-Division Courses (freshman and sophomore)
100-199 First-Year Courses
200-299 Second-Year Courses

Upper-Division Courses (junior and senior)
300-399 Third-Year Courses
400-499 Fourth-Year Courses

Graduate Courses
500-599 Graduate Courses

Other Codes

Each Term:

Some courses in this section have a code following the course title. This code designates when the course will be offered. F indicates Fall, W indicates Winter, S indicates Spring.

Lecture, Lab, Credit Hours:

The three numbers following the course title. For example:

CST 101 Introduction to Personal Computing
(3-3-4) = weekly lecture hours – lab hours – total credits

For more information, see Baccalaureate General Education Requirements  

Courses with the following notation fulfill the appropriate general education requirements: 
C - Communication H - Humanities HP - Humanities Performance SS - Social Science

Special Terms

As Required: This term designates a course or series of courses which will be offered only as enrollment, student interest, or individual department needs demand and as staffing allows. A course so designated may be offered if special student needs, situations of extreme hardship, or other unusual circumstances deem it in the best interest of both the student(s) and the institution to do so.

Hours to be Arranged Each Term: Normally students negotiate individually with faculty members and/or departments and arrange to have courses so designated offered for the term most suitable to their unique situation.

Corequisite: A course that must be taken simultaneously with another course. Corequisites are noted at the end of each course description.

Prerequisite: A course that must be passed satisfactorily before another course may be taken. Prerequisites are noted at the end of each course description. Courses transferred in to Oregon Tech with a C- or better meet the prerequisite requirement of obtaining a C or better.

Quarter Credit: A credit hour is an amount of work represented in intended learning outcomes and verified by evidence of student achievement that is an institutionally established equivalency that reasonably approximates not less than:

  1. One hour of classroom or direct faculty instruction and a minimum of two hours of out-of-class student work each week for approximately fifteen weeks for one semester or trimester hour of credit, or ten to twelve weeks for one quarter hour of credit, or the equivalent amount of work over a different amount of time; or
  2. At least an equivalent amount of work as required in paragraph (1) of this definition for other academic activities as established by the institution, including laboratory work, internships, practicals, studio work, and other academic work leading to the award of credit hours.

A numerical credit value assigned to certain number of lecture or laboratory hours. A lecture class meeting for three 50-minute periods a week would be assigned three units of credit. Students have traditionally been expected to spend an additional six hours of outside class work per week for each three units of lecture class credit. Generally, a lab class requires three hours per week for one unit of credit, or a total of nine in-lab hours with no additional outside class work expected for three units of lab class credit.

Reading and Conference: A course taken on an independent study basis with the supervision of an instructor, usually consisting of weekly conferences, assigned readings, research papers, etc.

Seminar: A class taught by a group discussion process rather than by means of formal lecture. Student research and reporting are usually expected.

Sequence: A series of classes in the same subject area that, taken as a whole, comprise a full year’s work. Generally, course sequences are numbered consecutively, and often (though not always) should be taken in the numerical order listed (i.e., CHE 201  should be taken before CHE 202 , etc.).

 

Mechanical Engineering Technology

   •  MET 433 - HVAC
   •  MET 436 - Control Systems
   •  MET 437 - Heat Transfer II
   •  MET 438 - Reciprocating and Turbine Engines
   •  MET 462 - Vacuum Technology
   •  MET 465 - Computational Strength of Materials
   •  MET 475 - Parametric Modeling
   •  MET 480 - Vibrations
   •  MET 490 - Senior Projects I
   •  MET 491 - Senior Projects II
   •  MET 492 - Senior Projects III

Manufacturing Engineering Technology

   •  MFG 101 - Introduction to Manufacturing
   •  MFG 103 - Introductory Welding Processes
   •  MFG 107 - Seminar
   •  MFG 112 - Introduction to Manufacturing Processes
   •  MFG 120 - Introductory Machining Processes
   •  MFG 204 - Data Management
   •  MFG 207 - Seminar
   •  MFG 220 - Manufacturing Processes II
   •  MFG 223 - Casting and Molding Processes
   •  MFG 245 - Electronics Manufacturing
   •  MFG 275 - CAD for Manufacturing
   •  MFG 295 - Individual Studies
   •  MFG 298 - Reading and Conference
   •  MFG 299 - Laboratory Practice
   •  MFG 307 - Seminar
   •  MFG 313 - Manufacturing Analysis and Planning
   •  MFG 314 - Geometric Dimensioning and Tolerancing
   •  MFG 317 - Machine Element Design
   •  MFG 325 - Principles of Metrology, Machining and Welding
   •  MFG 326 - Solid Mechanics
   •  MFG 331 - Industrial Controls
   •  MFG 333 - Statistical Methods for Quality Improvement
   •  MFG 334 - Manufacturing Group Project
   •  MFG 341 - Numerical Control Programming
   •  MFG 342 - Computer Aided Machining
   •  MFG 343 - Manufacturing Tool Design
   •  MFG 344 - Design of Manufacturing Tooling
   •  MFG 351 - Microelectronics Manufacturing Processes I
   •  MFG 352 - Microelectronics Manufacturing Processes II
   •  MFG 353 - Microelectronics Manufacturing Processes III
   •  MFG 404 - Co-op Field Practice
   •  MFG 405 - Reading and Conference
   •  MFG 407 - Seminar
   •  MFG 408 - Workshop
   •  MFG 415 - Finishing Methods
   •  MFG 420 - Advanced Manufacturing Processes
   •  MFG 425 - Plastic Manufacturing Processes
   •  MFG 445 - Plant Layout and Handling Systems
   •  MFG 447 - Lean Manufacturing
   •  MFG 453 - Automation and Robotics in Manufacturing
   •  MFG 454 - Thermal Systems for Manufacturing
   •  MFG 456 - Materials Science
   •  MFG 461 - Senior Project I
   •  MFG 462 - Senior Project II
   •  MFG 463 - Senior Project III
   •  MFG 465 - Advanced Welding Methods
   •  MFG 503 - Thesis
   •  MFG 507 - Seminar
   •  MFG 521 - The Manufacturing Management Team in the Global Enterprise
   •  MFG 522 - Manufacturing Business Philosophies
   •  MFG 523 - Capitalization Principles for Manufacturing
   •  MFG 524 - Project and Budget Planning for Manufacturing
   •  MFG 525 - International Economics for Manufacturing
   •  MFG 531 - Engineering Mechanics
   •  MFG 533 - Thermal Processes and Technology in Manufacturing
   •  MFG 534 - Design Technology for Manufacturability
   •  MFG 535 - Product Life Software
   •  MFG 536 - Automated Technology for Tool Path Generation
   •  MFG 537 - Product Data Management and Configuration Control
   •  MFG 538 - Special Problems in Manufacturing Software
   •  MFG 562 - Advanced Materials Science and Technology
   •  MFG 563 - Inventory Control and Production Planning
   •  MFG 564 - Quality Concepts and Philosophies
   •  MFG 595 - Selected Graduate Topics in Manufacturing
   •  MFG 596 - Selected Topics in Engineering Science and Design Technology
   •  MFG 597 - Selected Topics in Manufacturing Software and Computer Integration
   •  MFG 598 - Selected Topics in Advanced Manufacturing Materials and Processes Technology
   •  MFG 599 - Selected Topics in Business, Financial and Management Processes

Management

   •  MGT 107 - Seminar
   •  MGT 207 - Seminar
   •  MGT 212 - Fundamentals of Renewable Energy Management
   •  MGT 307 - Seminar
   •  MGT 321 - Operations Management I
   •  MGT 322 - Operations Management II
   •  MGT 323 - Operations Management III
   •  MGT 335 - Project Management
   •  MGT 345 - Engineering Economy
   •  MGT 391 - Co-op Field Practice
   •  MGT 392 - Co-op Field Practice
   •  MGT 407 - Seminar
   •  MGT 421 - Quality Management
   •  MGT 422 - Materials Management
   •  MGT 423 - Logistics Management
   •  MGT 461 - Lean/Six Sigma Management I
   •  MGT 462 - Lean/Six Sigma Management II
   •  MGT 463 - Lean/Six Sigma Management III

Management Information Systems

   •  MIS 101 - Word Processing Software Laboratory
   •  MIS 102 - Spreadsheet Lab
   •  MIS 103 - Presentation Graphics Software Laboratory
 

Page: 1 <- 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 -> 17