|
Electrical Engineering |
|
-
EE 320 - Adv Circuit Systems Analysis Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Methods of circuit analysis and circuit theorems. Introduction to the Laplace transform and its applications. Advanced circuit analysis using Laplace transform techniques. Transfer function analysis. Impulse and frequency response of circuits and systems. Bode plots. Stability.
Prerequisites: EE 123 or EE 223 , and MATH 252
|
|
-
EE 321 - Electronics I Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Basic semiconductor theory. Diodes and diode circuits. Bipolar-juntion transistor (BJT). Ebers-Moll model. BJT amplifiers (CE, CB & CD). Multistage and differential amplifiers. Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET). MOSFET amplifiers (CS, CG & CD). Multistage MOSFET amplifiers. Op-Amps.
Prerequisites: EE 123 or EE 223 , and MATH 252 Corequisites: EE 225 or EE 320
|
|
-
EE 323 - Electronics II Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Current sources. Current mirrors. Cascade active loads. Multistage amplifiers. Differential amplifiers. Frequency response. Miller’s theorem. Negative feedback amplifer types: Voltage, Current, transconductance and transresistance. Stability and pole location. Gain and phase margins. Frequency compensation.
Prerequisites: EE 321 with grade “C” or better, and EE 225 or EE 320
|
|
-
EE 325 - Electronics III Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Real operational amplifiers and basic circuits. Output stages. Power amplifiers. Filters, passive and active. Oscillators. Wave-shaping circuits. D/A and A/D circuits.
Prerequisite: EE 323 with grade “C” or better
|
|
-
EE 331 - Digital System Design w/HDL Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Introduces the student to a Hardware Descriptive Language and describes its role in digital design. Dataflow, Behavioral and Structural Modeling, Logic Partitioning, Hierarchal Design, CPLDs, and FPGAs. DC parameters and CPLD Timing Models. Design examples including keyboard scanner, counters, ALUs, multipliers and controllers.
Prerequisite: EE 133 with grade “C” or better
|
|
-
EE 333 - Intro to Microcontrollers Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Introductory course in microcontroller design. Topic include interrupt controller, time/counters, A/D converters, PWM channels, USARTs, SPI, two-wire interfaces, LEDs, LCDs, motors, and various sensors. Hands-on projects or lab assignments require C and/or assembly language programming to develop applications.
Prerequisite: CST 116 Corequisite: EE 131 or EE 133 or EET 216
|
|
-
EE 335 - Advanced Microcontrollers Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced course in design and development of micro-controller-based systems. Topics include internal peripheral devices, external devices interfacing, and micro-controller system design. Learning objectives are accomplished through design of fully integrated projects or lab assignments using C and/or assemble language programming.
Prerequisite: EE 333 with grade “C” or better
|
|
-
EE 341 - Electricity/Magnetism w/Transm Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Review vector calculus. Flux, potential, gradient, divergence, curl and field intensity. Static electric and magnetic fields. Maxwell’s equations. Boundary conditions. Uniform plane waves in media and free space. Reflection and transmission at interfaces. Propagation of guided waves. Transmission line. Antennas.
Prerequisites: EE 123 or EE 221 , MATH 252 , MATH 254 , and PHY 202 or PHY 222
|
|
-
EE 343 - Solid State Electronic Devices Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Crystal properties and growth of semiconductors. Atoms and electrons. Energy bands and charge carriers in semiconductors. Excess carriers in semiconductors, p-n junctions. FETs and BJTs. Optoelectronic devices. High-frequency and high-power devices.
Prerequisites: MATH 252 , and PHY 202 or PHY 222 Corequisite: EE 321
|
|
-
EE 347 - Digital Logic Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Number systems; combinational logic including Boolean algebra, DeMorgan’s Theorems and Karnaugh Maps; digital TTL, CMOS IC characteristics, conventional IC functions; sequential logic including flip-flops, counters, registers and state diagrams. Combinational and sequential logic circuits will be simulated, built and tested.
Prerequisite: MATH 112
|
|
-
EE 355 - Control System Design Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Continuous-domain systems and Laplace transform review. System modeling, identification and linearization. System response and stability analysis. Classical tracking and regulating controller design using computers. PID tuning, Lab exercises in modeling, design and implementation.
|
|
-
EE 401 - Communication Systems Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Signal Analysis, Fourier series, Fourier Transforms; analog signal transmission and Reception (AM, FM, PM); effects of noise in Analog Systems. Digital Data and Communication Systems; effects of noise in Digital Systems.
Prerequisite: EE 311 or EE 430
|
|
-
EE 407 - Seminar Lecture Hours: 12 Lab Hours: 0 Credit Hours: 12
(Hours to be arranged each term.)
|
|
-
EE 419 - Power Electronics Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Power electronic device characterization. Rectifiers, DC-DC converters and inverters design, modeling, and build.
Prerequisite: EE 321
|
|
-
EE 421 - Analog Intgrted - Circuit Dsgn Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Models of IC active devices. Review single-transistro and multiple-transistor amplifiers. Current mirrors, active loads, and references. Output stages. Operational amplifiers with single-ended outputs. Frequency response of ICs, noise in ICs bipolar, MOS and BiCMOS IC technology. Student must register for laboratory section.
Prerequisite: EE 323 Corequisite: EE 325
|
|
-
EE 423 - CMOS Digital Intg Circuit Dsgn Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
MOSFETs, threshold voltage, body effect, channel lengths, CMOS, inverter characteristics, transmission gates, performance (latch-up, parameter estimation, capacitance), domino logic, registers, scan test, layout.
Prerequisites: CST 133 or EE 133 , and EE 321
|
|
-
EE 425 - Wireless Communication Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Baseband digital systems, messages, characters and symbols, sampling theorems. Noise sources, M-ary signals, baseband formatting including PCM waveforms, digital filters including FIR and IIR. Matched filters, band-pass modulation and demodulation techniques, and an introduction to spread spectrum transmission. Student must register for laboratory section.
Prerequisites: EE 133 /CST 133 and EE 223 , both with grade “C” or better
|
|
-
EE 426 - RF/Wireless Systems Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Hardware components, system parameters, and architectures of RF and microwave wireless systems. Topics include microwave transmission lines, Smith charts, impedance matching networks, antenna systems, microwave components, receivers and transmitters, radar systems and sensors, and wireless communication systems.
Prerequisite: EE 341
|
|
-
EE 430 - Linear Sys & Digital Signal Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Introduction to signals and systems. Spectral analysis techniques. Fourier Series and the continuous-time Fourier transform (CTFT). Discrete-time Fourier transform (DTFT) and digital Fourier transform (DFT). Computational spectral analysis using the FFT. FIR and IIR filters. Z-transform. Practical implementation of digital filters and computational spectral analysis using MATLAB.
Prerequisite: EE 225 or EE 320
|
|
-
EE 431 - Digital Signal Processing Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Discrete systems and signals, linear time invariant systems, difference equations, frequency response, Z-transforms, analysis software, discrete Fourier transforms.
Prerequisites: EE 311 and EE 335 , both with grade “C” or better
|
|
-
EE 432 - Advanced Digital System Design Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced digital system design with Field Programmable Gate Arrays (FPGAs). Students implement designs with pre-generated and custon digital logic functions using VHDL and/or Verilog hardware description languages. Projects include digital systems design, simulations, and hardware implementation.
Prerequisites: CST 116 and EE 331 , both with grade ”C” or better
|
|
-
EE 441 - Biomedical I Intro Biomed Engr Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Introduction to biomedical engineering anatomy and physiology for engineers, bioelectric phenomena, biomedical sensors, biomedical instrumentation, biosignal processing, cardiovasculat mechanics, biomaterials, tissue engineering, biomedical imaging and clinical engineering. Student must register for a laboratory section.
Prerequisite: EE 311 with grade “C” or better
|
|
-
EE 443 - Biomedical II Signal Procssng Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Fundamental problems of biomedical signal processing; signal analysis; signal modeling, sources and types of biomedical signals. Arterial and ambulatory blood pressure (ABP/ABPM); intracranial pressures (ICP); pulse oximetry (SpO2); electrocardiogram (ECG). Stochastic, harmonic models, spectrum analysis and time-frequency analysis. Student must register for a laboratory section.
Prerequisite: EE 311 with grade “C” or better
|
|
-
EE 445 - Biomedical III Instrumentation Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Review of biological systems (human), signals, measurements and transducers; bio-electrical signals and amplifiers; electrocardiograph (ECG); blood pressure; ultrasonography; x-ray; radiology and nuclear medicine equipement; power sources; electro-magnetic interfernece (EMI) effects; and electrical safety. Student must register for a laboratory section.
Prerequisite: EE 311 with grade “C” or better
|
|
-
EE 448 - Geometric Optics Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Reflection and refraction at plane and curved surfaces; imaging properties of lenses; first-order Gaussian optics and thin-lens system layout; matrix optics; ray-tracing software; spherical and chromatic aberrations.
Prerequisite: PHY 223
|
|
-
EE 449 - Radiometry & Optical Detect Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Fundamentals of radiometry and photometry; detection of light using thermal and photon (photoemissive, photoconductive, and photovoltaic) methods; noise processes; blackbodies; charge transfer devices; spectoradiometry.
Prerequisites: EE 223 and PHY 223
|
|
-
EE 450 - Physical Optics Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Spherical and planar waves; scalar diffraction theory; Fresnel and Fraunhofer diffraction and application to measurement; interference and interferometers; optical transfer functions; coherent optical systems and holography.
Prerequisite: PHY 223
|
|
-
EE 451 - Lasers Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Laser radiation properties, laser cavities, coherence, atomic spectra, pumping rate, power gain threshold conditions, beam shape, mode structure; Ion, molecular, solid-state, dye, semiconductor, and fiber lasers.
Prerequisite: EE 450 or PHY 450
|
|
-
EE 452 - Waveguides and Fiber Optics Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Light popagation in fibers and waveguides; termination, coupling, and splicing of fibers; fiber optic communication; optical time domain reflectometry, fiber amplifiers, and fiber sensors.
Prerequisite: EE 450 or PHY 450
|
|
-
EE 453 - Optical Metrology Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Modern optical meetrology with emphasis on non-destructive testing; Fourier optics; Moire and polarization methods; classic and holographic interferometry; speckle technniques; fringe analysis.
Prerequisite: EE 450 or PHY 450
|
|
-
EE 461 - Control Engineering I: Classical Methods Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
An introduction to the design and compensation of linear control systems using a complex frequency-domain approach. Feedback control of first- and second-order systems, controller sensitivity, disturbance rejection, stability, frequency response methods. Introduction to state-space modeling. Computer simulation of feedback control systems.
Prerequisites: EE 225 or EE 320 , ENGR 267 , and MATH 321 , all with grade “C” or better. Engineering majors who have completed MECH 326 and MECH 480 , both with grade “C” or better, may also enroll.
|
|
-
EE 465 - Sensors and Instrumentation Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced course in sensors and instrumentation for embedded applications. Topics include a study of transducers, medical sensors, position sensors, automotive sensors, and sensor arrays. Students will also study sensor synchronization, A/D converters, linearization, sampling, error sources/budget, and noise margin analysis.
Prerequisite: EE 331 with grade “C” or better Corequisite: PHY 223
|
|
-
EE 471 - Machine Learning I Lecture Hours: 4 Lab Hours: 0 Credit Hours: 4
Theory and practice of Genetic Algorithms, Evolution Strategies, Backprop, Kernel Methods, Naive Bayes, Bayesian Belief Nets, Fuzzy Inference; brief discussion of Genetic Programming, Swarm Intelligence, Reinforcement Learning, Bayes Optimal.
Prerequisite: EE 430 , or CST 116 and MATH 341 , or ENGR 267 and MATH 341
|
|
-
EE 473 - Machine Learning II Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Integration of Information Theory and Statistical Learning into a generalized framework including Support-Vector Machines, Adaptive Resonance, and Adaptive Critics, plus project.
Prerequisite: EE 471
|
|
-
EE 475 - Micropower Systems Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced course in low-power solutions for embedded systems. Topics will include low-power processor architectures, power management subsystems, processor sleep modes, power circuits, power supply sequencing, battery technology, rechargeable power sources, charge capacity models, IoT applications.
Prerequisite: EE 323 with grade “C” or better
|
|
-
EE 485 - Printed Circuit Board Design Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
A course on modern PCB technology and design skills required for successful implementation of PCB designs in industry. This course provides direct, hands-on experience with industry standards, tools, and design techniques. Students will learn schematic capture and PCB layout. Cross-listed with EE 585.
Prerequisites: EE 335 and EE 341 , both with grade “C” or better
|
|
-
EE 501 - Communication Systems Lecture Hours: 3 Lab Hours: 4 Credit Hours: 5
Single Analysis, Fourier series, Fourier Transforms; Analog signal transmission and Reception (AM, FM, PM); effects of noise in Analog Systems. Digital Data and Communication Systems; effects of noise in Digital Systems. Cross-listed with EE 401.
Prerequisite: Graduate standing
|
|
-
EE 507 - Seminar Lecture Hours: 12 Lab Hours: 12 Credit Hours: 12
(Hours to be arranged each term.)
|
|
-
EE 525 - Wireless Communications Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Baseband digital systems, messages, characters and symbols, sampling theorems. Noise sources, M-ary signals, baseband formatting including PCM waveforms, digital filters including FIR and IIR. Matched filters, band-pass modulation and demodulation techniques, and an introduction to spread spectrum transmission. Cross-listed with EE 425.
Prerequisite: Graduate standing
|
|
-
EE 526 - RF/Wireless Systems Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Hardware components, system parameters, and architectures of RF and microwave wireless systems. Topics include microwave transmission lines, Smith charts, impedance matching networks, antenna systems, microwave components, receivers and transmitters, radar systems and sensors, and wireless communication systems.
Prerequisite: Graduate standing
|
|
-
EE 530 - Linear Sys & Digital Sig Prcsg Lecture Hours: 4 Lab Hours: 3 Credit Hours: 5
Introduction to signals and systems. Spectral analysis techniques. Fourier Series and the continuous-time Fourier transform (CTFT). Discrete-time Fourier transform (DTFT) and digital Fourier transform (DFT). Computational spectral analysis using the FFT. FIR and IIR filters. Z-transform. Practical implementation of digital filters and computational spectral analysis using CAD tools.
|
|
-
EE 532 - Advanced Digital System Design Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced digital system design with Field Programmable Gate Arrays (FPGAs). Students implement designs with pre-generated and custom digital custom logic functions using VHDL and/or Verilong hardware description languages. Projects include digital system design, simulation, and hardware implementation. Cross listed with EE 432.
Prerequisite: MSE Graduate standing
|
|
-
EE 535 - Embedded Systems Hardware Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced course in embedded systems hardware design and development. Topics include system-on-chip design, ARM processor architecture, digital signal processors, multicore processing, vector processors, graphics processing units, external serial interfaces, external memory interfaces, network interfaces, debuggers, in-circuit emulators, and hardware security. Cross-listed with EE 435
Prerequisite: MSE Graduate standing
|
|
-
EE 548 - Geometric Optics Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Reflection and refraction at plane and curved surfaces; imaging properties of lenses; first-order Gaussian optics and thin-lens system layout; matrix optics; ray-tracing software; spherical and chromatic aberrations.
Prerequisite: PHY 223
|
|
-
EE 549 - Radiometry & Optical Detection Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Fundamentals of radiometry and photometry; detection of light using thermal and photon (photoemissive, photoconductive, and photovoltaic) mehotds; noise processes; blackbodies; charge transfer devices; spectroradiometry.
Prerequisite: PHY 223
|
|
-
EE 550 - Physical Optics Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Spherical and planar waves; scalar diffraction theory; Fresnel and Fraunhofer diffraction and application to measurement; interference and interferometers; optical transfer functions; coherent optical systems and holography.
Prerequisite: PHY 223
|
|
-
EE 551 - Lasers Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Laser radiation properties, laser cavities, coherence, atomic spectra, pumping rate, power gain, threshold conditions, beam shape, mode structure; ion, molecular, solid-state, dye, semiconductor, and fiber lasers.
Prerequisite: EE 450 /PHY 450 or EE 550 /PHY 550
|
|
-
EE 553 - Optical Metrology Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Modern optical metrology with emphasis on non-destructive testing; Fourier optics; Moire and polarization methods; classic and holographic interferometry; specile techniques; fringe analysis.
Prerequisite: EE 450 /PHY 450 or EE 550 /PHY 550
|
|
-
EE 555 - Embedded Systems Software Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced course in embedded systems software design and development. Topics include bootloaders, embedded operating systems (RTOS, Embedded Linux), memory management systems, file systems, device drivers, integrated development environments (Eclipse, Compliers/Linkers/Makefiles), software revision control, and embedded programming (C++). Cross listed with EE 455
Prerequisite: MSE Graduate standing
|
|
-
EE 560 - Computational Data Science & Big Data Lecture Hours: 4 Lab Hours: 0 Credit Hours: 4
Applied data science, statistical techniques for data science, applied machine learning, big data analysis, big data processing, visualization and representation, applied computational & mathematical methods for data science, data analytics, applied text mining and network analysis.
Prerequisite: Graduate standing
|
|
-
EE 561 - Control Engineering I: Classical Methods Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
An introduction to the design and compensation of linear control systems using a complex frequency-domain approach. Feedback control of first- and second-order systems, controller sensitivity, disturbance rejection, stability, frequency response methods. Introduction to state-space modeling. Computer simulation of feedback control systems.
Prerequisite: Graduate standing
|
|
-
EE 565 - Sensor and Instrumentation Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced course in sensors and instrumentation for embedded applications. Topics include a study of transducers, medical sensors, position sensors, automotive sensors, and sensor arrays. Students will also study sensor synchronization, A/D converters, linearization, sampling, error sources/budget, and noise margin analysis. Cross-listed with EE 465.
|
|
-
EE 575 - Micropower Systems Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Advanced course in low-power solutions for embedded systems. Topics will include low power processor architectures, power management subsystems, processor sleep modules, power circuits, power supply sequencing, battery technology, rechargeable power sources, charge capacity models, IoT applications. Cross-listed with EE 475.
Prerequisite: MSE Graduate standing
|
|
-
EE 585 - Printed Circuit Board Design Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
A course on modern PCB technology and design skills required for successful implementation of PCB designs in industry. This course provides direct, hands-on experience with industry standards, tools, and design techniques. Students will learn schematic capture and PCB layout. Cross-listed with EE 485.
Prerequisite: MSE Graduate standing
|
|
-
EE 595 - Selected Grad Topics in EE Lecture Hours: 4 Lab Hours: 0 Credit Hours: 4
Selected electrical, computer, and embedded engineering topics at the graduate level. Course may be repeated for credit.
|
|
-
EE 596 - Grad Research & Development Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Research and development in electrical, computer, and embedded engineering topics at the graduate level. Course may be repeated for credit.
|
|
-
EE 597 - Graduate Project Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Graduate project in electrical, computer, and embedded engineering topics. Course may be repeated for credit.
|
|
-
EE 598 - Graduate Thesis Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Graduate thesis in electrical, computer, and embedded engineering topics. Course may be repeated for credit.
|
|
-
EE 599 - Practicum Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Supervised practical experience in electrical, computer, and embedded engineering topics at the graduate level. Course may be repeated for credit.
|
Electronics Engineering Technology |
|
-
EET 215 - Digital Circuits I Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Introduction to combinational logic, gates, boolean algebra. Karnaugh mapping, number systems/codes, arithmetic circuits, encoders/decoders, multiplexers/demultiplexers, comparators, parity, code conversions, introduction to HDL, PLD HW implementation.
Prerequisite: MATH 111
|
|
-
EET 216 - Digital Circuits II Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Introduction to sequential logic, latches, flip-flops, timers, counters, registers, finite state machines, logic testing, DC parameters and timing analysis.
Prerequisite: EET 215
|
|
-
EET 217 - Electric Circuits I Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
DC Analysis and First-Order Transients. Ohm’s law, Kirchoff’s laws, nodal analysis, mesh analysis, source transformations, Thevenin and Norton equivalents, maximum power transfer, superposition, introduction to op-amps, inductance and capacitance, transient response of RC and RL circuits.
Prerequisite: MATH 111
|
|
-
EET 218 - Electric Circuits II Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
AC Analysis, Second-Order Transients, introduction to electric power. Transient response of second-order circuits, sinusoids and phasonrs, sinusoidal steady-state, nodal analysis, mesh analysis, source transformations, Thevenin and Norton equivalents, sinusoidal steady-state power calculations, balanced three-phse circuits, mutual inductance, transformers.
Prerequisites: EET 217 and MATH 112
|
|
-
EET 219 - Semiconductor Devices & Amp Lecture Hours: 3 Lab Hours: 3 Credit Hours: 4
Introduction to semiconductor devices, characteristics and biasing of diodes and transistors, analysis and design of circuits using diodes, bipolar junction transistors, and field-effect transistors. Applications of transistors as diodes and switches.
Prerequisite: EET 218
|
|
-
EET 237 - AC Circuits, Filters & Signals Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
RC transient analysis, sinusoidal AC voltage, phasors, average and effective value, the decibel, simple RC transfer functions. low-pass, high-pass, and band-pass filters, periodic and aperiodic signals in time and frequency, bandwidth. For non-EET majors.
Prerequisites: EE 221 or EET 115 with grade “C” or better, and MATH 252 Corequisite: EET 238
|
|
-
EET 238 - AC Circuits, Filters Lab Lecture Hours: 0 Lab Hours: 3 Credit Hours: 1
Lab to accompany EET 237. For non-EET majors.
Prerequisites: EE 221 or EET 115 with grade “C” or better, and MATH 252 Corequisite: EET 237
|
|
-
EET 308 - Intro MOS Microelctrncs Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Introduction to microelectronics, semiconductor physics, integrated circuit (IC) technology, pn junction and MOS (Metal-Oxide-Semiconductor) electrostatics, MOS FETs (Field-Effect Transistors), selected digital circuits using CMOS (Complimentary MOS) FETs, PSPICE modeling of IC MOSFETs.
Prerequisites: CST 262 and EET 237 , or instructor consent Corequisite: EET 309
|
|
-
EET 309 - Intro MOS Microelec Lab Lecture Hours: 0 Lab Hours: 3 Credit Hours: 1
Laboratory companion to EET 308. Theoretical concepts discussed in lecture verified using available components and instrumentation. Computer simulation using PSPICE. Written and oral laboratory reports required.
Prerequisites: CST 262 , and EET 238 or EET 246, or instructor consent Corequisite: EET 308
|
Emergency Medical Technology-Paramedic |
|
-
EMS 107 - Seminar Lecture Hours: 10 Lab Hours: 0 Credit Hours: 10
(Hours to be arranged each term.)
|
|
-
EMS 115 - Introduction to EMS Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Introduces the fundamentals of an emergency medical services system, history, and professional roles and responsibilities. Discusses medical/legal and ethical issues, research and evidence based practice.
|
|
-
EMS 135 - Wilderness First Aid Lecture Hours: 1 Lab Hours: 0 Credit Hours: 1
Basic First Aid and CPR training for the outdoor adventurer or world traveler. Scenario-based learning using medical equipment improvised for wilderness settings. Course completion earns Wilderness First Aid and CPR certifications meeting the outdoor industry requirements. Customized group courses available.
|
|
-
EMS 151 - Emerg Med Tech (EMT) I Lecture Hours: 3 Lab Hours: 9 Credit Hours: 6
The first of two courses required for an entry-level career in emergency medical services. the course introduces students to the EMS system, professional attributes of an EMT, ambulance operations and the basic knowledge and skills of an EMT.
Prerequisite: Current CPR certification
|
|
-
EMS 152 - Emerg Med Tech (EMT) II Lecture Hours: 3 Lab Hours: 9 Credit Hours: 6
The second of two course focuses on the basic recognition and treatment of specific illnesses and injuries. The course includes 16-hours clinical and ambulance experience. Students successfully completing the course are eligible for Oregon and national certification examinations.
Prerequisite: EMS 151
|
|
-
EMS 190 - EMT Externship Lecture Hours: 0 Lab Hours: 12 Credit Hours: 4
EMS field experience with an affiliated transport agency. Students work at a BLS level under the direct supervision on one of the local EMS agency ambulances.
Prerequisite: EMS 152 or Oregon EMT certification
|
|
-
EMS 200 - Medical Terminology Lecture Hours: 0 Lab Hours: 0 Credit Hours: 3
Students build a strong medical vocabulary using prefixes, suffixes, and Greek and Latin verbs and adjectives. Students learn anatomical roots and examine anatomical structures, disease, procedures, tumors, and descriptive terms using simple word analysis.
|
|
-
EMS 207 - Seminar Lecture Hours: 10 Lab Hours: 0 Credit Hours: 10
(Hours to be arranged each term.)
|
|
-
EMS 211 - Prehospital Emerg Pharmacology Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Lectures relating specific emergencies to the types of medications used for treatment. Includes classications, actions, indications, adminstration and dosages, precautions and side effects of each of the medications used in prehospital treatment of medical and traumatic emergencies. In addition, students learn common prescription medications found in the home.
Prerequisite: CHE 210
|
|
-
EMS 218 - Trauma Emergencies Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Introduces the epidemiology and kinematics of trauma, and integrates the assessment findings with pathophysiology in the management of the acutely injured patient. Discusses considerations for special patient populations and includes a Prehospital Trauma Life Support Course.
|
|
-
EMS 231 - Medical Emergencies Lecture Hours: 4 Lab Hours: 0 Credit Hours: 4
The first in a series of three courses addressing the epidemiology and pathophysiology of various medical complaints; integrates assessment findings with the formulation of a treatment plan for the acute illness.
|
|
-
EMS 232 - Medical Emergencies II Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
A continuation of the series of three courses addressing the epidemiology and pathophysiology of various medical complaints; integrates assessment findings with the formulation of a treatment plan for the acute illness.
Prerequisite: EMS 231
|
|
-
EMS 233 - Medical Emergencies III Lecture Hours: 2 Lab Hours: 0 Credit Hours: 2
The conclusion of the sequence in medical emergencies where the epidemiology, pathophysiology and assessment findings are integrated to form a treatment plan for acute illnesses in the emergency setting.
Prerequisite: EMS 232
|
|
-
EMS 235 - Basic Electrocardiography Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Fundamentals of electrocardiography and interpretation of normal and abnormal ECG patterns. Normal and abnormal wave patterns, presentation and treatment of common cardiac diseases.
|
|
-
EMS 236 - Advanced Electrocardiography Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
Building upon basic EKG knowledge, this course advances into 12-lead EKG interpretation and prehospital treatment. Focusing on signs and symptoms of ischemia or infarction, axis deviation, and other EKG anomalies, students learn about various treatment modalities.
|
|
-
EMS 237 - Paramedic 12-Leads Lecture Hours: 1 Lab Hours: 0 Credit Hours: 1
Building upon knowledge that was presented in EMS 236 , this course explores 12-lead ECG interpretation further, and specifically how this skill can be used by paramedics.
Prerequisite: EMS 236
|
|
-
EMS 241 - Paramed Crisis Resrce Mgmt I Lecture Hours: 2 Lab Hours: 3 Credit Hours: 3
The first in a series of 3 courses addressing human factors contribution to EMS scene management. PCRM I focuses on human error, perception modalities, human emotion and motivation, and teamwork theory.
|
|
-
EMS 242 - Paramed Crisis Resrce Mgmt II Lecture Hours: 1 Lab Hours: 0 Credit Hours: 1
The second course in a series of 3 addressing the theory and practice of human factors contribution to EMS scene management. PCRM II focuses on the following human factor contributions to scene performance; review of acute healthcare environment challenges, cognitive attention, and crisis communication strategies.
Prerequisite: EMS 241
|
|
-
EMS 243 - Paramed Crisis Resrce Mgmt III Lecture Hours: 1 Lab Hours: 0 Credit Hours: 1
The third class in a series of 3 courses addressing the theory and practice of human factors contribution to EMS scene management. PCRM III focuses on the following human factor contributions to scene performance; stress and coping on decision-making, on-scene leadership characteristics, and organizational influences on error.
Prerequisite: EMS 242
|
|
-
EMS 271 - Paramedic Skills Lab I Lecture Hours: 2 Lab Hours: 3 Credit Hours: 3
The first of three courses reviews EMT level skills and introduces the advanced level paramedic skills. Students learn safe and effective skills performance and begin to integrate assessment, management and skills performance.
|
|
-
EMS 272 - Paramedic Skills Lab II Lecture Hours: 1 Lab Hours: 3 Credit Hours: 2
The second course in the series continues the development of advanced level skills proficiency. Students integrate knowledge of specific patient complaints with assessment and management skills.
Prerequisite: EMS 271
|
|
-
EMS 273 - Paramedic Skills Lab III Lecture Hours: 0 Lab Hours: 3 Credit Hours: 1
This course is designed to strengthen the students team lead abilities and to enhance critical thinking and decision making skills through scenario based skills practice sessions. Studens prepare for national certification practical exam stations.
Prerequisite: EMS 272
|
|
-
EMS 283 - Clinical Practicum I Lecture Hours: 0 Lab Hours: 18 Credit Hours: 6
Focusing on the emergency medical practices of a paramedic, students integrate classroom studies into clinical practices while working under the direct supervision of health care professionals.
Prerequisites: CHE 210 , EMS 218 , EMS 231 , EMS 235 , EMS 241 , and EMS 271
|
|
-
EMS 284 - Clinical Practicum II Lecture Hours: 0 Lab Hours: 18 Credit Hours: 6
Students integrate knowledge and skills with patient care practices as they rotate through clnical experience in a variety of medical specialties. Students work under the direct supervision of health care professionals in each medical specialty.
Prerequisites: CHE 210 , EMS 218 , EMS 231 , EMS 235 , EMS 241 , and EMS 271
|
|
-
EMS 291 - Pramed Field Extern Practic I Lecture Hours: 0 Lab Hours: 12 Credit Hours: 4
The first of two field experience courses with an affiliated advanced life support agency. Students complete an orientation to the field and work under the direct supervision of a paramedic preceptor responding to 911 emergency calls.
|
|
-
EMS 292 - Paramed Field Extern Prac II Lecture Hours: 0 Lab Hours: 36 Credit Hours: 12
The continuation of the field experience courses with an affiliated advanced life support agency. Students work in the field and work under the direct supervision of a paramedic preceptor responding to 911 emergency calls.
Prerequisite: EMS 291
|
|
-
EMS 321 - Community Paramedic I Lecture Hours: 4 Lab Hours: 0 Credit Hours: 4
First course in a two course series addressing the management of chronic illness, social service connection, and healthcare system navigation as it relates to the prehospital environment.
Prerequisite: Current National or State Paramedic Certification
|
|
-
EMS 322 - Community Paramedic II Lecture Hours: 4 Lab Hours: 0 Credit Hours: 4
Second course in a two course series addressing the management of chronic illness, social service connection, and healthcare system navigation as it relates to the prehospital environment.
Prerequisite: Current National or State Paramedic Certification
|
|
-
EMS 331 - Critical Care Transport Lecture Hours: 4 Lab Hours: 0 Credit Hours: 4
The first of two courses is designed to prepare paramedics to provide advanced critical care during transports, including performing advanced clinical patient assessments and providing invasive care beyond the standard scope of advanced pre-hospital care.
Prerequisite: Paramedic credentials or instructor consent
|
|
-
EMS 332 - Critical Care Transport II Lecture Hours: 3 Lab Hours: 0 Credit Hours: 3
The second of two courses is designed to prepare paramedics to provide advanced critical care during transports, including performing advanced clinical patient assessments and providing invasive care beyond the standard scope of advanced pre-hospital care.
Prerequisites: EMS 331 and EMS 381
|
|
-
EMS 341 - Community Para Clinical I Lecture Hours: 0 Lab Hours: 6 Credit Hours: 2
The first course in a series of two courses addressing the management of chronic illness, social service connection, and healthcare system navigation as it relates to the prehospital environment. This course focuses on the management of chronic/sub-acute illness.
Prerequisite: Current National or State Paramedic Certification Corequisite: EMS 321
|
|
-
EMS 342 - Community Para Clinical II Lecture Hours: 0 Lab Hours: 6 Credit Hours: 2
The second course in a series of two courses addressing the management of chronic illness, social service connection, and healthcare system navigation as it relates to the prehospital environment. This course focuses on the management of chronic/sub-acute illness.
Corequisite: EMS 322
|
|
Page: 1 <- 2
| 3
| 4
| 5
| 6
| 7
| 8
| 9
| 10
| 11
| 12
… Forward 10 -> 18 |